咨詢熱線
            
      18621916738
      
        
      
        
        
              
    
      

      


      
    
            
    
    

      










      









      
	
      當前位置：首頁   >  產品中心  >  西門子PLC模塊  >  西門子S7-1500PLC模塊  >  SM522數字量輸出模塊
            
              
      

      





      

	
    
       
        
      
    
            
      
                        
      
                        
      
                             
                            
      
                            
                            
      
                           
                        
      
                        
      
                        
      
                            
                            
      
                                
        
                                
                                    
        • 
                                
                                    
        • 
                                
                                    
        • 
                                
                                    
        • 
                                
                                    
        • 
                                
                                
      
                            
      
                            	
                        
      
                    
      
            
            
              
        
      
    
        
        
      
            
      SM522數字量輸出模塊
      
            
      簡要描述：SM522數字量輸出模塊，數字量輸出模塊可以切換設備中的 24 V DC 或 230 V AC 電壓，從而可將內部信號從控制器傳輸至設備。可以連接電磁閥、直流接觸器和指示燈。35 mm 寬的輸出模塊具有可設定的參數和診斷功能，因此可根據相應過程要求進行靈活調整。25 mm 寬的輸出模塊沒有可設定的參數或診斷功能，因此可極為方便地集成到工程系統中。建議將它們在只需要很少輸入通道的位置使用， 
      
            
        
           
      • 產品型號： 
        • 
           
      • 廠商性質：代理商
        • 
           
      • 更新時間：2017-09-05
        • 
           
      • 訪  問  量：2008
        • 
                
            
      
            
        
      
        
      
    
      
    
	
    
      
    	
        
        
      
        	
      詳細介紹
      
            
      
            	
      SM522數字量輸出模塊，西門子SM522數字量輸出模塊，西門子S7-1500數字量輸出模塊，西門子數字量輸出模塊，數字量輸出模塊
      數字量輸出模塊可以切換設備中的 24 V DC 或 230 V AC 電壓，從而可將內部信號從控制器傳輸至設備。可以連接電磁閥、直流接觸器和指示燈。
      35 mm 寬的輸出模塊具有可設定的參數和診斷功能，因此可根據相應過程要求進行靈活調整。
      25 mm 寬的輸出模塊沒有可設定的參數或診斷功能，因此可極為方便地集成到工程系統中。建議將它們在只需要很少輸入通道的位置使用，或在必須在十分有限的空間內部署大量通道的情況下使用。
      西門子 現貨銷售 質保一年 歡迎詢價
      SIEMENS 上海翰粵自動化系統有限公司
      上海翰粵自動化系統有限公司是中國西門子的合作伙伴，公司主要從事工業自動化產品的集成,銷售各維修。致力于為您提供在工業、化工、水泥、電力、環保等領域的電氣及自動化技術的完整解決方案，包括自動化產品及系統、工程項目執行及管理、主要過程控制領域，以及專業的售后服務、培訓等。
      上海翰粵代理銷售以下系列產品：
      SIEMENS 可編程控制器
      1、 SIMATIC S7 系列PLC：S7-200、S7-1200、S7-300、S7-400、ET-200，S71500
      2、 邏輯控制模塊 LOGO！230RC、230RCO、230RCL、24RC、24RCL等
      3、 SITOP直流電源 24V DC 1.3A、2.5A、3A、5A、10A、20A、40A可并聯.
      4、HMI 觸摸屏TD200 TD400C K-TP OP177 TP177,MP277 MP377,
      SIEMENS 交、直流傳動裝置
      1、 交流變頻器 MICROMASTER系列：MM420、MM430、MM440、G110、G120.　　
      　　MIDASTER系列：MDV
      2、全數字直流調速裝置 6RA23、6RA24、6RA28、6RA70、6SE70系列
      SIEMENS 數控 伺服
      SINUMERIK:801、802S 、802D、802D SL、810D、840D、611U、S120
      系統及伺報電機，力矩電機，直線電機，伺服驅動等備件銷售。
        型號及訂貨號
      訂貨號：6ES7522-1BH01-0AB0
      SIMATIC S7-1500, 數字量輸出模塊 DQ16xDC 24V/0,5A; 16 通道 8 個一組; 4A 每組; 單通道診斷; 替換值
       
       
      訂貨號：
      6ES7522-1BH10-0AA0
      SIMATIC S7-1500, 數字量輸出模塊, DQ16xDC 24V/0,5A, 16 通道 8 個一組, 4A 每組 inkl. 前連接器 直插式
       
       
      訂貨號：
      6ES7522-1BL01-0AB0
      SIMATIC S7-1500, 數字量輸出模塊 DQ 32xDC 24V/0,5A; 32 通道 8 個一組; 4A 每組; 單通道診斷; 替換值
      訂貨號：6ES7522-1BL10-0AA0
      SIMATIC S7-1500, 數字量輸出模塊, DQ32xDC 24V/0,5A, 32 通道 8 個一組, 4A 每組 inkl. 前連接器 直插式
      訂貨號：6ES7522-5EH00-0AB0
      SIMATIC S7-1500, 數字量輸出模塊 DQ16x 24...48VUC/125V DC/0.5A; 16 通道 8 個一組; 0.5A 每組; 替換值; DERATING 注意
      訂貨號：6ES7522-5FF00-0AB0
      SIMATIC S7-1500, 數字量輸出模塊 DQ 8xAC 230V/2A;TRIAC; 8 通道 8 個一組; 2A 每組; 替換值
      		 
      訂貨號：6ES7522-5FH00-0AB0
      SIMATIC S7-1500, 數字量輸出模塊 DQ 16xAC 230V/1A;TRIAC; 16 通道 8 個一組; 2A 每組; 替換值
      		 
      訂貨號：6ES7522-5HF00-0AB0
      SIMATIC S7-1500, 數字量輸出模塊 DQ 8xAC 230V/5A;繼電器; 8 通道 8 個一組; 5A 每組; 診斷;替換值
      訂貨號：6ES7522-5HH00-0AB0
      SIMATIC S7-1500, 數字量輸出模塊 DQ 16x 230V AC/2A ST;繼電器 16 通道 8 個一組; 4A 每組; 診斷;替換值
       
      概述
      • 8、16 和 32 通道數字量輸出模塊
      • 靈活地選擇控制器以滿足相應任務需要
      • 用于使用附加輸出對系統進行后續擴展
      • 35 mm 寬的模塊具有參數設置和診斷功能
      • 25 mm 寬的模塊可在狹小空間內使用：極為經濟，無參數設置或診斷功能
      應用
      數字量輸出模塊可以切換設備中的 24 V DC 或 230 V AC 電壓，從而可將內部信號從控制器傳輸至設備。可以連接電磁閥、直流接觸器和指示燈。
      35 mm 寬的輸出模塊具有可設定的參數和診斷功能，因此可根據相應過程要求進行靈活調整。
      25 mm 寬的輸出模塊沒有可設定的參數或診斷功能，因此可極為方便地集成到工程系統中。建議將它們在只需要很少輸入通道的位置使用，或在必須在十分有限的空間內部署大量通道的情況下使用。
      根據需要，可在一個站中并排使用兩種模塊。由于具有統一特性并采用共同的系統附件，處理十分方便。
      提供了以下寬度為 35 mm 的數字量輸出模塊：
      • DQ 16x24VDC/0.5A ST；
        數字量輸出模塊，16 通道 24 VDC / 0.5 A（晶體管）；兩個電壓組；每組 4 A；可設置診斷功能；可設置輸出替代值
      • DQ 32x24VDC/0.5A ST；
        數字量輸出模塊，32 通道 24 VDC / 0.5 A（晶體管）；四個電壓組；每組 4 A；可設置診斷功能；可設置輸出替代值
      • DQ 8x24VDC/2A HF; 
        數字量輸出模塊，8 通道 24 VDC / 2 A（晶體管）；四個電壓組；每組 8 A；可設置診斷功能；可設置輸出替代值
      • DQ 8x230VAC/2A ST; 
        數字量輸出模塊，8 通道 230 VAC / 2 A（晶體管）；八個電壓組；每組 2 A；可設置診斷功能；可設置輸出替代值
      • DQ 8x230VAC/5A ST;
        帶有 8 點輸出的數字量輸出模塊，230 V AC/5 A（繼電器）；8 個電壓組；每組 5 A；可設置輸出的替代值
      提供了以下寬度為 25 mm 的數字量輸出模塊：
      • DQ 16x24VDC/0.5A BA;
        帶有 16 個通道的數字量輸出模塊，24 VDC/0.5 A（晶體管）；源型輸出；兩個電壓組 4A
      • DQ 32x24VDC/0.5A BA;
        帶有 16 個通道的數字量輸出模塊，24 VDC/0.5 A（晶體管）；源型輸出；四個電壓組；每組 4 A
      設計
      • 用一個螺絲安裝在 S7-1500 安裝導軌上
      • 35 mm 模塊 采用螺釘型端子或推入式端子的標準化 40 針前連接器（不能用于 25 mm 模塊）
      • 25 mm 模塊 采用推入式端子的標準化 40 針前連接器（不能用于 35 mm 模塊）
      • 標準化、協調型前連接器針腳分配，更便于接線
      • 可連接芯線截面積0.25 mm2 至 1.5 mm2（AWG24 至 16）
      • 集成式電壓橋接件，用于靈活形成電壓組(僅 35 mm 模塊)
      • 前連接器的預接線位置
      • 前蓋帶有可擴充的電纜室，即使*接線時也如此
      • 模塊正面的清晰標簽
        • 模塊類型
        • 訂貨號
        • 硬件和固件型號
        • 通道編號標簽
        • 電纜連接圖
      含在供貨范圍之內：
      • 用于手工貼標簽的一個標簽條
      • 一個 U 型連接器
      • 印制有文字的前門
      • 前連接器（(僅 25 mm 模塊）
      功能
      • 統一的顯示和診斷方式：
        • 故障（紅色 LED）和運行（綠色 LED）模塊狀態顯示
        • 用于信號狀態日志的信號狀態顯示。"0" 和日志。"1"（綠色 LED）或短路指示（紅色 LED）
        • 顯示 24 V DC 電源電壓（綠色 LED）
      • 支持的功能：
        • 識別和維護數據 IM0 至 IM3
        • 固件更新
        • 與通道有關的參數分配（僅限 HF 模塊）
        • 按通道進行診斷（僅限 HF 模塊）
        • 等時同步模式（取決于模塊）
        • 可以為輸出設置替換值（僅限于 35 mm 模塊）
        技術規范
      Article number
      6ES7522-1BH01-0AB0
      6ES7522-1BL01-0AB0
      6ES7522-1BF00-0AB0
      6ES7522-5EH00-0AB0
       
      S7-1500, DQ 16X24V DC/0.5A HF
      S7-1500, DQ 32X24VDC/0.5A HF
      S7-1500, DQ 8X24VDC/2A HF
      S7-1500, DQ 16X24...48VUC/125VDC/0.5A ST
      General information
       
       
       
       
      Product type designation
      DQ 16x24VDC/0.5A HF
      DQ 32x24VDC/0.5A HF
      DQ 8x24VDC/2A HF
      DQ 16x24 ... 48VUC/125VDC/0.5A ST
      HW functional status
      FS01
      FS01
      FS01
      FS01
      Firmware version
      V1.0.0
      V1.0.0
      V2.1.0
      V1.0.0
      • ● FW update possible
      Yes
       
      Yes
      Yes
      Product function
       
       
       
       
      • ● I&M data
      Yes; I&M0 to I&M3
      Yes; I&M0 to I&M3
      Yes; I&M0 to I&M3
      Yes; I&M0 to I&M3
      Engineering with
       
       
       
       
      • ● STEP 7 TIA Portal configurable/integrated as of version
      V13 SP1 / -
      V13 SP1 / -
      V13 SP1 / -
      V13 SP1 / -
      • ● STEP 7 configurable/integrated as of version
       
       
      V5.5 SP3 / -
      V5.5 SP3 / -
      • ● PROFIBUS as of GSD version/GSD revision
      V1.0 / V5.1
      V1.0 / V5.1
      V1.0 / V5.1
      V1.0 / V5.1
      • ● PROFINET as of GSD version/GSD revision
      V2.3 / -
      V2.3 / -
      V2.3 / -
      V2.3 / -
      Operating mode
       
       
       
       
      • ● DQ
      Yes
      Yes
      Yes
      Yes
      • ● DQ with energy-saving function
      No
      No
      Yes; with an application
      No
      • ● PWM
      No
      No
      Yes
      No
      • ● Oversampling
      No
      No
      No
      No
      • ● MSO
      Yes
      Yes
      Yes
      Yes
      Supply voltage
       
       
       
       
      Rated value (DC)
      24 V
      24 V
      24 V
       
      permissible range, lower limit (DC)
      20.4 V
      20.4 V
      20.4 V
       
      permissible range, upper limit (DC)
      28.8 V
      28.8 V
      28.8 V
       
      Reverse polarity protection
      Yes; through internal protection with 7 A per group
      Yes; through internal protection with 7 A per group
      Yes; through internal protection with 10 A per group
       
      Input current
       
       
       
       
      Current consumption, max.
      30 mA
      60 mA
      40 mA; 20 mA per group, no output is activated.
       
      Output voltage
       
       
       
       
      Rated value (DC)
      24 V
      24 V
      24 V
      24 V; 48 V, 125 V
      Rated value (AC)
       
       
       
      24 V; 48 V (50 - 60 Hz)
      Power
       
       
       
       
      Power available from the backplane bus
      1.1 W
      1.1 W
      0.9 W
      2 W
      Power loss
       
       
       
       
      Power loss, typ.
      2 W
      3.5 W
      5.6 W; 6.8 W for PWM operation
      3.8 W
      Digital outputs
       
       
       
       
      Number of digital outputs
      16
      32
      8
      16
      Current-sinking
       
       
       
      Yes
      Current-sourcing
      Yes
      Yes
      Yes
      Yes
      Short-circuit protection
      Yes; Clocked electronically
      Yes; Clocked electronically
      Yes
       
      • ● Response threshold, typ.
      1 A
      1 A
      3 A
       
      Limitation of inductive shutdown voltage to
      L+ (-53 V)
      L+ (-53 V)
      -17 V
      200 V (suppressor diode)
      Controlling a digital input
      Yes
      Yes
      Yes
      Yes
      Digital output functions, parameterizable
       
       
       
       
      • ● Freely usable digital output
       
       
      Yes
       
      • ● PWM output
       
       
      Yes
       
      • — Number, max.
       
       
      2
       
      • — Cycle duration, parameterizable
       
       
      Yes; 2 ... 100 ms continuous
       
      • — ON period, min.
       
       
      0 %
       
      • — ON period, max.
       
       
      100 %
       
      • — Resolution of the duty cycle
       
       
      0.1 %
       
      • — Minimum pulse duration
       
       
      300 µs
       
      Switching capacity of the outputs
       
       
       
       
      • ● with resistive load, max.
      0.5 A
      0.5 A
       
      0.5 A
      • ● on lamp load, max.
      5 W
      5 W
      10 W
      40 W; At 125 V DC, 10 W at 48 V UC, 5 W at 24 V UC
      Load resistance range
       
       
       
       
      • ● lower limit
      48 ?
      48 ?
      12 ?
       
      • ● upper limit
      12 k?
      12 k?
      4 k?
       
      Output voltage
       
       
       
       
      • ● for signal "1", min.
      L+ (-0.8 V)
      L+ (-0.8 V)
      L+ (-0.8 V)
      L+ (-1.0 V)
      Output current
       
       
       
       
      • ● for signal "1" rated value
      0.5 A
      0.5 A
      2 A
      0.5 A
      • ● for signal "1" permissible range, max.
      0.5 A
      0.5 A
      2.4 A; Note derating specification for PWM operation
      0.6 A
      • ● for signal "0" residual current, max.
      0.5 mA
      0.5 mA
      0.5 mA
       
      Output delay with resistive load
       
       
       
       
      • ● "0" to "1", typ.
       
       
      80 µs
       
      • ● "0" to "1", max.
      100 µs
      100 µs
      100 µs
      5 ms
      • ● "1" to "0", typ.
       
       
      300 µs
       
      • ● "1" to "0", max.
      500 µs
      500 µs
      500 µs
      5 ms
      Parallel switching of two outputs
       
       
       
       
      • ● for logic links
      Yes
      Yes
      Yes
      Yes
      • ● for uprating
      No
      No
      No
      No
      • ● for redundant control of a load
      Yes
      Yes
      Yes
      Yes
      Switching frequency
       
       
       
       
      • ● with resistive load, max.
      100 Hz
      100 Hz
      100 Hz; With PWM operation: 500 Hz
      25 Hz
      • ● with inductive load, max.
      0.5 Hz; According to IEC 60947-5-1, DC-13
      0.5 Hz; According to IEC 60947-5-1, DC-13
      0.5 Hz; According to IEC 60947-5-1, DC-13; max. 500 Hz with PWM operation only with external circuit; see additional description in the manual
      0.5 Hz
      • ● on lamp load, max.
      10 Hz
      10 Hz
      10 Hz
      10 Hz
      Total current of the outputs
       
       
       
       
      • ● Current per channel, max.
      0.5 A; see additional description in the manual
      0.5 A; see additional description in the manual
      2 A; see additional description in the manual
      0.5 A
      • ● Current per group, max.
      4 A; see additional description in the manual
      4 A; see additional description in the manual
      8 A; see additional description in the manual
      0.5 A
      • ● Current per module, max.
      8 A; see additional description in the manual
      16 A; see additional description in the manual
      16 A; see additional description in the manual
      8 A
      Cable length
       
       
       
       
      • ● shielded, max.
      1 000 m
      1 000 m
      1 000 m
      1 000 m
      • ● unshielded, max.
      600 m
      600 m
      600 m
      600 m
      Isochronous mode
       
       
       
       
      Isochronous operation (application synchronized up to terminal)
      Yes
      Yes
      No
      No
      Execution and activation time (TCO), min.
      70 µs
      70 µs
       
       
      Bus cycle time (TDP), min.
      250 µs
      250 µs
       
       
      Interrupts/diagnostics/status information
       
       
       
       
      Diagnostics function
      Yes
      Yes
      Yes
      No
      Substitute values connectable
      Yes
      Yes
      Yes
      Yes
      Alarms
       
       
       
       
      • ● Diagnostic alarm
      Yes
      Yes
      Yes
      No
      Diagnostic messages
       
       
       
       
      • ● Monitoring the supply voltage
      Yes
      Yes
      Yes
      No
      • ● Wire-break
      Yes
      Yes
      No
      No
      • ● Short-circuit
      Yes
      Yes
      Yes
      No
      • ● Group error
      Yes
      Yes
      Yes
       
      Diagnostics indication LED
       
       
       
       
      • ● RUN LED
      Yes; Green LED
      Yes; Green LED
      Yes; Green LED
      Yes; Green LED
      • ● ERROR LED
      Yes; Red LED
      Yes; Red LED
      Yes; Red LED
      Yes; Red LED
      • ● Monitoring of the supply voltage (PWR-LED)
      Yes; Green LED
      Yes; Green LED
      Yes; Green LED
      No
      • ● Channel status display
      Yes; Green LED
      Yes; Green LED
      Yes; Green LED
      Yes; Green LED
      • ● for channel diagnostics
      Yes; Red LED
      Yes; Red LED
      Yes; Red LED
      No
      • ● for module diagnostics
      Yes; Red LED
      Yes; Red LED
      Yes; Red LED
      Yes; Red LED
      Potential separation
       
       
       
       
      Potential separation channels
       
       
       
       
      • ● between the channels
      No
      No
      No
      Yes
      • ● between the channels, in groups of
      8
      8
      4
      1
      • ● between the channels and backplane bus
      Yes
      Yes
      Yes
      Yes
      Permissible potential difference
       
       
       
       
      between different circuits
       
       
       
      125 V DC/48 V AC
      Isolation
       
       
       
       
      Isolation tested with
      707 V DC (type test)
      707 V DC (type test)
      707 V DC (type test)
      2 000 V DC
      Ambient conditions
       
       
       
       
      Ambient temperature during operation
       
       
       
       
      • ● horizontal installation, min.
      0 °C
       
       
      0 °C
      • ● horizontal installation, max.
      60 °C
       
       
      60 °C
      • ● vertical installation, min.
      0 °C
       
       
      0 °C
      • ● vertical installation, max.
      60 °C
       
       
      40 °C
      Decentralized operation
       
       
       
       
      Prioritized startup
      Yes
      Yes
      Yes
      Yes
      Dimensions
       
       
       
       
      Width
      35 mm
      35 mm
      35 mm
      35 mm
      Height
      147 mm
      147 mm
      147 mm
      147 mm
      Depth
      129 mm
      129 mm
      129 mm
      129 mm
      Weights
       
       
       
       
      Weight, approx.
      230 g
      280 g
      240 g
      230 g
       
      Article number
      6ES7522-5HF00-0AB0
      6ES7522-5HH00-0AB0
      6ES7522-5FF00-0AB0
      6ES7522-5FH00-0AB0
       
      S7-1500, DQ 8X230VAC/5A ST (RELAY)
      S7-1500, DQ 16X230VAC/2A ST (RELAY)
      S7-1500, DQ 8X230VAC/2A ST (TRIAC)
      S7-1500, DQ 16X230VAC/1A ST (TRIAC)
      General information
       
       
       
       
      Product type designation
      DQ 8x230 V AC/5 A ST (relay)
      DQ 16x230VAC/2A ST (relay)
      DQ 8x230 V AC/2A ST (triac)
      DQ 16x230VAC/1A ST (Triac)
      HW functional status
      FS01
      FS01
      FS01
      FS01
      Firmware version
      V2.0.0
      V1.0.0
      V2.0.0
      V1.0.0
      • ● FW update possible
      Yes
      Yes
      Yes
      Yes
      Product function
       
       
       
       
      • ● I&M data
      Yes; I&M0 to I&M3
      Yes; I&M0 to I&M3
      Yes; I&M0 to I&M3
      Yes; I&M0 to I&M3
      Engineering with
       
       
       
       
      • ● STEP 7 TIA Portal configurable/integrated as of version
      V12 / V12
      V13 SP1 / -
      V12 / V12
      V13 SP1 / -
      • ● STEP 7 configurable/integrated as of version
      V5.5 SP3 / -
      V5.5 SP3 / -
      V5.5 SP3 / -
      V5.5 SP3 / -
      • ● PROFIBUS as of GSD version/GSD revision
      V1.0 / V5.1
      V1.0 / V5.1
      V1.0 / V5.1
      V1.0 / V5.1
      • ● PROFINET as of GSD version/GSD revision
      V2.3 / -
      V2.3 / -
      V2.3 / -
      V2.3 / -
      Operating mode
       
       
       
       
      • ● DQ
      Yes
      Yes
      Yes
      Yes
      • ● DQ with energy-saving function
      No
      No
      No
      No
      • ● PWM
      No
      No
      No
      No
      • ● Oversampling
      No
      No
      No
      No
      • ● MSO
      Yes
      Yes
      Yes
      Yes
      Supply voltage
       
       
       
       
      Rated value (DC)
      24 V
      24 V
       
       
      permissible range, lower limit (DC)
      20.4 V
      20.4 V
       
       
      permissible range, upper limit (DC)
      28.8 V
      28.8 V
       
       
      Reverse polarity protection
      Yes
      Yes
       
       
      Input current
       
       
       
       
      Current consumption, max.
      80 mA
      150 mA
       
       
      Output voltage
       
       
       
       
      Rated value (AC)
      230 V; 24 V DC to 120 V DC / 24 V AC to 230 V AC
      230 V; 24 V DC to 120 V DC / 24 V AC to 230 V AC
      230 V; 120/230V AC, 50/60 Hz
      230 V; 120/230V AC, 50/60 Hz
      Power
       
       
       
       
      Power available from the backplane bus
      0.8 W
      0.8 W
      0.9 W
      1.2 W
      Power loss
       
       
       
       
      Power loss, typ.
      5 W
      5 W
      10.8 W
      11.1 W
      Digital outputs
       
       
       
       
      Number of digital outputs
      8
      16
      8
      16
      Current-sinking
      Yes
      Yes
       
      Yes
      Current-sourcing
      Yes
      Yes
      Yes
      Yes
      Short-circuit protection
      No
      No
      No
      No
      Controlling a digital input
      possible
      Yes
       
       
      Switching capacity of the outputs
       
       
       
       
      • ● with resistive load, max.
       
       
      2 A
      1 A
      • ● on lamp load, max.
      1 500 W; 10 000 operating cycles
      50 W (230 V AC), 5 W (24 V DC)
      50 W
      50 W
      • ● Low energy/fluorescent lamps with electronic control gear
      10x 58 W (25 000 operating cycles)
       
       
       
      • ● Fluorescent tubes, conventionally compensated
      1x 58 W (25 000 operating cycles)
       
       
       
      • ● Fluorescent tubes, uncompensated
      10x 58 W (25 000 operating cycles)
       
       
       
      Output voltage
       
       
       
       
      • ● for signal "1", min.
       
       
      L1 (-1.5 V) at maximum output current; L1 (-8.5 V) at minimum output current
      L1 (-1.5 V) at maximum output current; L1 (-8.5 V) at minimum output current
      Output current
       
       
       
       
      • ● for signal "1" rated value
      5 A
      2 A
      2 A
      1 A
      • ● for signal "1" permissible range, min.
      5 mA; 10 V
      10 mA; 10 V
      10 mA
      10 mA
      • ● for signal "1" permissible range, max.
      8 A; thermal continuous current
      2 A; thermal continuous current
      15 A; max. 1 AC cycle
      15 A; max. 1 AC cycle
      • ● for signal "0" residual current, max.
      0 A
      0 A
      2 mA
      2 mA
      Output delay with resistive load
       
       
       
       
      • ● "0" to "1", max.
       
       
      1 AC cycle
      1 AC cycle
      • ● "1" to "0", max.
       
       
      1 AC cycle
      1 AC cycle
      Parallel switching of two outputs
       
       
       
       
      • ● for logic links
      Yes
      Yes
      No
      No
      • ● for uprating
      No
      No
      No
      No
      • ● for redundant control of a load
      Yes
      Yes
      Yes
      Yes
      Switching frequency
       
       
       
       
      • ● with resistive load, max.
      2 Hz
      1 Hz
      10 Hz
      10 Hz
      • ● with inductive load, max.
      0.5 Hz
      0.5 Hz
      0.5 Hz
      0.5 Hz
      • ● on lamp load, max.
      2 Hz
      1 Hz
      1 Hz
      1 Hz
      Total current of the outputs
       
       
       
       
      • ● Current per channel, max.
      8 A; see additional description in the manual
      2 A; see additional description in the manual
      2 A; see additional description in the manual
      1 A; see additional description in the manual
      • ● Current per group, max.
      8 A; see additional description in the manual
      4 A; see additional description in the manual
      2 A; see additional description in the manual
      2 A; see additional description in the manual
      • ● Current per module, max.
      64 A; see additional description in the manual
      32 A; see additional description in the manual
      10 A; see additional description in the manual
      10 A; see additional description in the manual
      Relay outputs
       
       
       
       
      • ● Number of relay outputs
      8
      16
       
       
      • ● Rated supply voltage of relay coil L+ (DC)
      24 V
      24 V
       
       
      • ● Current consumption of relays (coil current of all relays), typ.
      80 mA
      150 mA
       
       
      • ● external protection for relay outputs
      With miniature circuit breaker with characteristic B for: cos φ 1.0: 600 A cos φ 0.5 ... 0.7: 900 A with 8 A Diazed fuse: 1000 A
      Miniature circuit breaker B10 / B16
       
       
      • ● Contact connection (internal)
      No
      No
       
       
      • ● Size of motor starters according to NEMA, max.
      5
      5
       
       
      • ● Number of operating cycles, max.
      4 000 000; see additional description in the manual
      see additional description in the manual
       
       
      • ● Relay approved acc. to UL 508
      Yes; 250 V AC/5 A g.p.; 120 V AC TV-4 tungsten; A300, R300
      No
       
       
      Switching capacity of contacts
       
       
       
       
      • — with inductive load, max.
      see additional description in the manual
      2 A; see additional description in the manual
       
       
      • — with resistive load, max.
      see additional description in the manual
      2 A; see additional description in the manual
       
       
      Triac outputs
       
       
       
       
      • ● Size of motor starters according to NEMA, max.
       
       
      5
      4
      Cable length
       
       
       
       
      • ● shielded, max.
      1 000 m
      1 000 m
      1 000 m
      1 000 m
      • ● unshielded, max.
      600 m
      600 m
      600 m
      600 m
      Isochronous mode
       
       
       
       
      Isochronous operation (application synchronized up to terminal)
      No
      No
      No
      No
      Interrupts/diagnostics/status information
       
       
       
       
      Diagnostics function
      Yes
      Yes
      No
      No
      Substitute values connectable
      Yes
      Yes
      Yes
      Yes
      Alarms
       
       
       
       
      • ● Diagnostic alarm
      Yes
      Yes
      No
      No
      Diagnostic messages
       
       
       
       
      • ● Monitoring the supply voltage
      Yes
      Yes
      No
      No
      • ● Wire-break
      No
      No
      No
      No
      • ● Short-circuit
      No
      No
      No
      No
      Diagnostics indication LED
       
       
       
       
      • ● RUN LED
      Yes; Green LED
      Yes; Green LED
      Yes; Green LED
      Yes; Green LED
      • ● ERROR LED
      Yes; Red LED
      Yes; Red LED
      Yes; Red LED
      Yes; Red LED
      • ● Monitoring of the supply voltage (PWR-LED)
      Yes; Green LED
      Yes; Green LED
      No
      No
      • ● Channel status display
      Yes; Green LED
      Yes; Green LED
      Yes; Green LED
      Yes; Green LED
      • ● for channel diagnostics
      No
      No
      No
      No
      • ● for module diagnostics
      Yes; Red LED
      Yes; Red LED
      Yes; Red LED
      Yes; Red LED
      Potential separation
       
       
       
       
      Potential separation channels
       
       
       
       
      • ● between the channels
      Yes; Switching of different phases permitted
      No
      Yes
      No
      • ● between the channels, in groups of
      1
      2
      1
      2
      • ● between the channels and backplane bus
      Yes
      Yes
      Yes
      Yes
      • ● Between the channels and load voltage L+
      Yes
      Yes
       
       
      • ● Between the channels and load voltage L1
       
       
      Yes
       
      Permissible potential difference
       
       
       
       
      between different circuits
      250 V AC between the channels and the supply voltage L+; 250 V AC between the channels and the backplane bus; 500 V AC between the channels
      250 V AC between the channels and the supply voltage L+; 250 V AC between the channels and the backplane bus; 500 V AC between the channels
      250 V AC between the channels and the backplane bus; 500 V AC between the channels
      250 V AC between the channels and the backplane bus; 500 V AC between the channels
      Isolation
       
       
       
       
      Isolation tested with
      Between channels: 3 100 V DC; between channels backplane bus: 3 100 V DC; between L+ and backplane bus: 707 V DC (type test)
      Between channels: 3 100 V DC; between channels backplane bus: 3 100 V DC; between L+ and backplane bus: 707 V DC (type test)
      3 100 V DC
      3 100 V DC
      Ambient conditions
       
       
       
       
      Ambient temperature during operation
       
       
       
       
      • ● horizontal installation, min.
      0 °C
      0 °C
      0 °C
      0 °C
      • ● horizontal installation, max.
      60 °C
      60 °C
      60 °C
      60 °C
      • ● vertical installation, min.
      0 °C
      0 °C
      0 °C
      0 °C
      • ● vertical installation, max.
      40 °C
      40 °C
      40 °C
      60 °C
      Decentralized operation
       
       
       
       
      Prioritized startup
      Yes
      Yes
      Yes
      Yes
      Dimensions
       
       
       
       
      Width
      35 mm
      35 mm
      35 mm
      35 mm
      Height
      147 mm
      147 mm
      147 mm
      147 mm
      Depth
      129 mm
      129 mm
      129 mm
      129 mm
      Weights
       
       
       
       
      Weight, approx.
      350 g
      350 g
      290 g
      310 g
       
      Article number
      6ES7522-1BH10-0AA0
      6ES7522-1BL10-0AA0
       
      S7-1500, DQ 16X24VDC/0.5A BA
      S7-1500, DQ 32X24VDC/0.5A BA
      General information
       
       
      Product type designation
      DQ 16x24VDC/0.5A BA
      DQ 32x24VDC/0.5A BA
      HW functional status
      FS01
      FS01
      Firmware version
      V1.0.0
      V1.0.0
      • ● FW update possible
      Yes
      Yes
      Product function
       
       
      • ● I&M data
      Yes; I&M0 to I&M3
      Yes; I&M0 to I&M3
      Engineering with
       
       
      • ● STEP 7 TIA Portal configurable/integrated as of version
      V13 / V13
      V13 / V13
      • ● STEP 7 configurable/integrated as of version
      V5.5 SP3 / -
      V5.5 SP3 / -
      • ● PROFIBUS as of GSD version/GSD revision
      V1.0 / V5.1
      V1.0 / V5.1
      • ● PROFINET as of GSD version/GSD revision
      V2.3 / -
      V2.3 / -
      Operating mode
       
       
      • ● DQ
      Yes
      Yes
      • ● DQ with energy-saving function
      No
      No
      • ● PWM
      No
      No
      • ● Oversampling
      No
      No
      • ● MSO
      Yes
      Yes
      Supply voltage
       
       
      Rated value (DC)
      24 V
      24 V
      permissible range, lower limit (DC)
      20.4 V
      20.4 V
      permissible range, upper limit (DC)
      28.8 V
      28.8 V
      Reverse polarity protection
      Yes; through internal protection with 7 A per group
      Yes; through internal protection with 7 A per group
      Input current
       
       
      Current consumption, max.
      30 mA
      60 mA
      Output voltage
       
       
      Rated value (DC)
      24 V
      24 V
      Power
       
       
      Power available from the backplane bus
      1.15 W
      1.15 W
      Power loss
       
       
      Power loss, typ.
      2.2 W
      3.8 W
      Digital outputs
       
       
      Number of digital outputs
      16
      32
      Current-sourcing
      Yes
      Yes
      Short-circuit protection
      Yes
      Yes
      • ● Response threshold, typ.
      1 A
      1 A
      Limitation of inductive shutdown voltage to
      L+ (-53 V)
      L+ (-53 V)
      Controlling a digital input
      Yes
      Yes
      Switching capacity of the outputs
       
       
      • ● with resistive load, max.
      0.5 A
      0.5 A
      • ● on lamp load, max.
      5 W
      5 W
      Load resistance range
       
       
      • ● lower limit
      48 ?
      48 ?
      • ● upper limit
      12 k?
      12 k?
      Output voltage
       
       
      • ● for signal "1", min.
      L+ (-0.8 V)
      L+ (-0.8 V)
      Output current
       
       
      • ● for signal "1" rated value
      0.5 A
      0.5 A
      • ● for signal "1" permissible range, max.
      0.5 A
      0.5 A
      • ● for signal "0" residual current, max.
      0.5 mA
      0.5 mA
      Output delay with resistive load
       
       
      • ● "0" to "1", max.
      100 µs
      100 µs
      • ● "1" to "0", max.
      500 µs
      500 µs
      Parallel switching of two outputs
       
       
      • ● for logic links
      Yes
      Yes
      • ● for uprating
      No
      No
      • ● for redundant control of a load
      Yes
      Yes
      Switching frequency
       
       
      • ● with resistive load, max.
      100 Hz
      100 Hz
      • ● with inductive load, max.
      0.5 Hz; According to IEC 60947-5-1, DC-13
      0.5 Hz; According to IEC 60947-5-1, DC-13
      • ● on lamp load, max.
      10 Hz
      10 Hz
      Total current of the outputs
       
       
      • ● Current per channel, max.
      0.5 A; see additional description in the manual
      0.5 A; see additional description in the manual
      • ● Current per group, max.
      4 A; see additional description in the manual
      4 A; see additional description in the manual
      • ● Current per module, max.
      8 A; see additional description in the manual
      16 A; see additional description in the manual
      Cable length
       
       
      • ● shielded, max.
      1 000 m
      1 000 m
      • ● unshielded, max.
      600 m
      600 m
      Isochronous mode
       
       
      Isochronous operation (application synchronized up to terminal)
      No
      No
      Interrupts/diagnostics/status information
       
       
      Diagnostics function
      No
      No
      Substitute values connectable
      No
      No
      Alarms
       
       
      • ● Diagnostic alarm
      No
      No
      Diagnostic messages
       
       
      • ● Monitoring the supply voltage
      No
      No
      • ● Wire-break
      No
      No
      • ● Short-circuit
      No
      No
      • ● Group error
      No
      No
      Diagnostics indication LED
       
       
      • ● RUN LED
      Yes; Green LED
      Yes; Green LED
      • ● ERROR LED
      Yes; Red LED
      Yes; Red LED
      • ● Monitoring of the supply voltage (PWR-LED)
      Yes; Green LED
      Yes; Green LED
      • ● Channel status display
      Yes; Green LED
      Yes; Green LED
      • ● for channel diagnostics
      No
      No
      • ● for module diagnostics
      No
      No
      Potential separation
       
       
      Potential separation channels
       
       
      • ● between the channels
      No
      No
      • ● between the channels, in groups of
      8
      8
      • ● between the channels and backplane bus
      Yes
      Yes
      Isolation
       
       
      Isolation tested with
      707 V DC (type test)
      707 V DC (type test)
      Decentralized operation
       
       
      Prioritized startup
      Yes
      Yes
      Dimensions
       
       
      Width
      25 mm
      25 mm
      Height
      147 mm
      147 mm
      Depth
      129 mm
      129 mm
      Weights
       
       
      Weight, approx.
      230 g
      280 g
      Other
       
       
      Note:
      Supplied incl. 40-pole push-in front connectors
      Supplied incl. 40-pole push-in front connectors
        
            
      
            
            
      產品咨詢
      
            
      



      

      
	
      留言框  
      
	
        
		
      • 
			
        產品：
        
			
        
		
        • 
		
      • 
			
        您的單位：
        
			
        
		
        • 
		
      • 
			
        您的姓名：
        
			
        
		
        • 
		
      • 
			
        聯系電話：
        
			
        
		
        • 
		
      • 
			
        常用郵箱：
        
			
        
		
        • 
        
      • 
			
        省份：
        
			
        
		
        • 
		
      • 
			
        詳細地址：
        
			
        
		
        • 
		
        
      • 
			
        補充說明：
        
			
        
		
        • 
		
      • 
			
        驗證碼：
        
			
        
            	
        
                    
                    
                
        
                請輸入計算結果（填寫阿拉伯?dāng)?shù)字），如：三加四=7
            
        
		
        • 
		
      • 
			
        
			
        
		
        • 
	
      	
    

      

      

      
    
    		
            
        
      
        
      
    
      

      





      
  
      
    
  
      
  
      
    
      
      
      
        
      
          
      聯系我們 
      
          上海翰粵自動化系統有限公司
          公司地址：上海市松江區思賢路2399弄137號   技術支持：化工儀器網 
          
        
            
      • 聯系人：黃政武
        • 
            
      • QQ：76868608
        • 
            
      • 公司傳真：021-57657276
        • 
            
      • 郵箱：76868608@qq.com
        •  
          
      
          
         
      
         
      
         
      掃一掃 更多精彩
        
          
      
            
            
      微信二維碼
      
           
      
          
      
            
            
      網站二維碼
      
          
      
          
      
      
      
    
      
    
      
    
  
      

      




       
     

      




      

 
  




亚洲精品成人片在线观看精品字幕|
亚洲s色大片在线观看|
国产v亚洲v天堂无码网站|
337P日本欧洲亚洲大胆艺术图|
亚洲午夜电影在线观看|
亚洲综合网美国十次|
久久综合亚洲鲁鲁五月天|
亚洲激情中文字幕|
亚洲一区二区中文|
久久精品国产亚洲精品2020|
久久精品九九亚洲精品|
18gay台湾男同亚洲男同|
无码专区—VA亚洲V天堂|
亚洲AV日韩AV高潮无码专区|
国产成人亚洲精品青草天美|
国产精品亚洲片在线观看不卡|
亚洲综合无码AV一区二区|
亚洲亚洲人成综合网络|
亚洲国产成人一区二区精品区|
久久91亚洲人成电影网站|
亚洲AV永久无码区成人网站|
亚洲AV无码国产精品色午友在线|
亚洲不卡av不卡一区二区|
亚洲国产综合专区电影在线
|
亚洲精品夜夜夜妓女网|
亚洲精品无码av人在线观看|
精品亚洲一区二区|
亚洲日本一区二区|
亚洲成人福利网站|
国产亚洲精品影视在线|
亚洲日本一线产区和二线|
亚洲av无码专区在线电影|
亚洲成年看片在线观看|
久久精品国产亚洲7777|
亚洲精品白浆高清久久久久久|
亚洲Av熟妇高潮30p|
亚洲欧洲另类春色校园小说|
亚洲精品456人成在线|
久久亚洲精品11p|
国产亚洲精品无码拍拍拍色欲|
久久亚洲国产精品一区二区|